| Customization: | Available |
|---|---|
| After-sales Service: | Installation Instruction |
| Application: | Office |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
A packed container, abbreviated as a packing box, is composed of top frame components, bottom frame components, corner columns, and several interchangeable wall panels. It adopts a modular design concept and production technology to modularize a container room into standard components. The whole box is not welded, all bolts are connected, rust free, and can be assembled quickly. It can be transported from top to bottom, loose parts, and whole box. The transportation method is flexible, and suitable transportation methods can be adopted according to the project site situation and project needs.
This product is based on the box body as the basic unit, and the box body structure adopts special cold-formed galvanized steel components. The insulation materials for the enclosure are all fire-resistant and non combustible materials. The water, heating, electrical, decoration, and supporting functions are all prefabricated in the factory, without the need for secondary construction. It can be moved in by on-site assembly or overall lifting. It can be used alone or through different combinations of horizontal and vertical directions to form a spacious space and stacking.[Product Introduction]
A packed container, abbreviated as a packing box, is composed of top frame components, bottom frame components, corner columns, and several interchangeable wall panels. It adopts a modular design concept and production technology to modularize a container room into standard components. The whole box is not welded, all bolts are connected, rust free, and can be assembled quickly. It can be transported from top to bottom, loose parts, and whole box. The transportation method is flexible, and suitable transportation methods can be adopted according to the project site situation and project needs.
This product is based on the box body as the basic unit, and the box body structure adopts special cold-formed galvanized steel components. The insulation materials for the enclosure are all fire-resistant and non combustible materials. The water, heating, electrical, decoration, and supporting functions are all prefabricated in the factory, without the need for secondary construction. It can be moved in by on-site assembly or overall lifting. It can be used alone or through different combinations of horizontal and vertical directions to form a spacious space and stacking.
1. Plate structure, saving transportation and storage space: Taking into account the distance to the destination and the convenience of on-site installation, full container transportation, flattened compression transportation, or container transportation can be chosen. The house can also be prefabricated in the factory and lifted and transported as a whole. In order to adapt to long-distance transportation, box houses are divided into several parts: roof, ground, columns, and panels. Several houses can be packaged as a single container volume for long-distance transportation. After being packed in a single standard box, it is only 1/4 of the original volume of the house, making it convenient for sea and land transportation. It is sturdy and sturdy, greatly saving space during transportation and storage, thereby reducing costs.
2. Factory pre assembly to minimize on-site workload: The top and bottom frames of the standard box, including the decorative layer and circuit, are assembled in the factory. The columns and wall panels are connected to the top and bottom frames with bolts on site, the circuit terminals are connected in sequence, and the decorative molded parts are nailed to the corresponding positions. A standard box room is assembled.
| Container House Configuraiton | |||||
| Flat Pack Office Block | Frame | Bottom Beam: T3.0mm; 160*160mm, Galvanized cold-rolled steel Buttom Purlin: T1.2mm; 385MMjizijian |
|||
| Column: T3.0mm; 210*150*2526mm Galvanized cold-rolled steel | |||||
| Roof Beam:T3.0mm; 180*180mm, Galvanized cold-rolled steel Roof Purlin:T1.2mm; C90*40mm, Galvanized square tube |
|||||
| Wall Board | Rock Wool Wall Board: 50mm, Width 1150mm, density 80kg/m³ 0.3mm color steel plate Fireproof level: A Level |
||||
| Ceiling | Insulation Layer: 50mm glass wool, density 14kg/m³ Ceiling Tile: 0.3mm color steel plate-Type 831 wave tile | ||||
| Floor | Cement Board: 18mm PVC Floor Leather: 1.6mm | ||||
| Door | Steel Door Size≥ W840×H2035mm | ||||
| Window | UPVC push-pull window W1150×H1100mm×2pcs 5+9A+5 Hollow glass with anti-mosquito screen | ||||
| Downspout | *50mm,PVC drainge pipe 4pcs | ||||
| Decoration Line | PVC Skirting: 0.4mm skirting lines Column Line: 0.4mm color bending steel Roof Corner Line: 0.4mm color bending steel |
||||
| Electricity | LED Light Bar:36W*2set Socket: 5-hole socket--10A*3pcs, 3-hole socket for AC--16A*1pcs One-touch Switch: 1pcs Distributor box*1pc |
||||
){kind=link}